You have no items in your
A single sided locker can fit one cycle. A double sided locker can fit two cycles.
We would recommend 800mm centres as standard in-between stands this will allow you to easily manoeuvre cycles in and out of positions.
As standard a gap of 50mm will be left between the shelter and a building. However, further protection from the elements can be offered in the form of a weather resistant barrier. For more information on weather resistance barriers please contact a member of our Sales Team.
Yes, we offer a range of options such as PVC roll up panels, Roller Shutter Doors and PETg UV Side Panels.
We offer a standard range of colours however any BS/RAL colour can be accommodated POA.
Extensions to form banks of shelters, Roof extensions and guttering can all be added at a later date to suitable shelters.
We can offer additional security through CCTV, lighting, high security panels and security gates.
A range of Security measures can be offered, from simple Mesh Swinging or Sliding gates, Roller Shutter Doors, Automated Doors and much more. A wide range of locking mechanisms are available for access including Hasp and Staple, Digital, Mechanical locks, Keyed locks and Swipe card access.
The lead time on a Bespoke shelter is generally 10-12 weeks from point of order to installation. However on some occasions this can be improved on. If you require a shorter lead time please contact a member of our Sales team.
The lead time on a standard shelter is generally four weeks however on some occasions this can be improved on. If you require a shorter lead time please contact a member of our Sales team.
Yes you can collect the majority of our products from our Head Office in Newcastle-Under-Lyme. Please contact a member of our Sales Team to discuss collections.
Our Shelters are supplied flat packed ready to install on site. The only exception to this being the Lunar and Sofco Junior Shelters which are fully assembled.
Our Warranties and Guarantees can be viewed via this link.
Our Maintenance procedures can be viewed directly via our O&M Manuals. Alternatively Broxap can offer a Maintenance and Cleaning Service which will ensure peace of mind that your Canopy is receiving the best possible aftercare. To discuss our maintenance packages further please contact a member of our sales team.
All of our shelters require concrete foundations in the form of concrete pads or a concrete base. If you would like a price for groundworks or for further information on foundation details please contact a member of our Sales team.
Yes, we can provide a one stop shop from the initial site visit, to ordering your shelter, completing a site survey & groundworks along with an installation service. Please contact a member of our Sales team to discuss this in more detail and to obtain costs.
Initially you will need to contact your Local Authority to confirm if planning permission is required. If the answer is yes then Broxap can help you with this process. Simply enter your details to download our simple to use Planning Permission Guide.
Building Regulations specify the standard to which a structure should be built i.e strength, fire ratings etc. All of our structures are built to the following regulations;
Steelwork is galvanised to BS 1461 – offering a minimum of 34 years and longer, subject to location
BS EN 1990:2002+A1:2005 Eurocode – basis of structural design
BS EN 1993-1-1:2005 Eurocode 3 – Design of steel structures
BS EN 1991-1-3:2003 Eurocode 1 – Snow Loads
BS EN 1991-1-4:2005 Eurocode 1 – Wind Actions
All design work is assessed and underwritten by an independent Structural Engineer.
It is advisable that you contact your Local Building Control Officer to confirm if your canopy will need to conform to any specific Building Regulations.